Solution for oral administration
Contains per ml:
Vitamin A, retinol palmitate 10 000 IU.
Vitamin D3, cholecalciferol 3 000 IU.
Vitamin E, alpha-tocopherol acetate 50 mg.
Vitamin B1, thiamine hydrochloride 3 mg.
Vitamin B2, riboflavine sodium phosphate 6 mg.
Vitamin B6, pyridoxine hydrochloride 4 mg.
Vitamin B12, cyanocobalamin 30 mg.
Vitamin C, ascorbic acid 50 mg.
Vitamin K3 2 mg.
D-panthenol 20 mg.
Nicotinamide 40 mg.
Biotin 150 mg.
Folic acid 1 mg.
Choline chloride 100 mg.
Solvents ad 1 ml.
Vitamins are essential for the proper operation of numerous physiological functions.
This Oral is a well balanced combination of essential vitamins for calves, cattle, goats, poultry, sheep and swine. Used for:
- Prevention or treatment of vitamin deficiencies in farm animals.
- Prevention or treatment of stress (caused by vaccination, diseases, transport, high humidity, high temperatures or extreme temperature changes).
- Improvement of feed conversion.
No undesirable effects are to be expected when the prescribed dosage regimen is followed.
For oral administration:
Calves, goats and sheep : 1 ml per 20 kg body weight for 3 – 5 days.
Cattle : 1 ml per 40 kg body weight for 3 – 5 days.
Poultry and swine : 1 litre per 2000 litre drinking water for 3 – 5 days.
Keep out of reach of children.
Bottle containing 100, 500 and 1000 ml.
Form of product : Nutritional Oral liquids
Type of product : Vitamins,Amino Acids
Suited for animals : Cattle (cows),Goats,Poultry,Sheep,Pigs (swine),Calves
Active ingredients : Vitamins
automatic 30 250ml plastic bottle oral liquid washing filling capping labeling line
The line is suitable for 25ml, 60ml, 125ml, 250ml round shape plastic oral liquid bottle, and its production capacity is: 40~60bottles/min.
The machine used as a assistant machine for all sorts of production line, it has the function of storing and arranging bottles.
Bottle-supplying Capacity: meet 1 phase requirements;
Rotary Plate Diameter: Φ900;
Electrical Source: 220V 50HZ 3phase 4 wire;
Overall size: 1100×700× 1200mm .
2.Plastic Bottle Washing Machine
This machine is used for cleaning of the plastic Bottles in the Oral Liquid Production Line, especially used for the irregular plastic bottle. The machine applies cycling type structure, bottle clamp to clamp bottles to finish washing bottles. After the bottles go through the used water, de-ion water (or other cleaning liquid) two inside and outside many times washing, and then blow the remaining water by purifying compressed air to reach the aim of cleaning.
Its structure is simple; operating is convenient, meets GMP requirements. It is the ideal equipment for pharmaceutical and healthcare factory.
Main Technical Specifications:
Production capacity: 40 ～ 60bottles/min
Applicable speed: 25ml/60ml/125ml/250ml round bottle
Turning used water flow capacity: 0.6m3 /h, Pressure: 0.2 ～ 0.25MPa
Distilled water capacity: 0.6m3 /h, Pressure:0.2 ～ 0.25Mpa
Purifying compressed air consumption capacity: 60m3 /h, Pressure: 0.2 ～ 0.25MPa
Electrical source: 380V 50Hz 3 phase 4 wire
The bottles through Bottle-in Tray enter the Conveyer, and the bottles are delivered into each gap of Dial Bottle Wheel through conveyer. And the Bottle-in Dial Wheel again deliver each bottle into the Bottle Clamp, the Bottle Clamp can auto clamp tightly the bottle and turn over 180 o . The bottle mouth is down, with the Rotary Tray moves, each bottle through the Turning Used Water, Tap Water and Purified Water for inner and outer cleaning, and then blows the remaining water by purifying compressed air to reach the aim of cleaning.
3.Oral Liquid Filling and Capping machine
The machine can the auto bottle-in, filling, cover-in, cover-screwing and bottle-out etc action. The structure is simple, action is dependable coordination, well synchronization, can be used in a single, and also in a production line. It is the ideal filling equipment for pharmaceutical and healthcare factory.
Main Technical Specifications:
Suitable bottle: 26ml/70/125ml/250ml round bottles;
Production Capacity:40~60 bottles/min;
Filling Type: Four pump straight line type;
Filling Precision: ±1%;
P lacement rate≥99%;
Power: 2KW ( the machine shell must touch with the ground);
Electric Source: 380V 50Hz Three-phase and four Lines
The fully automated labeling machine, Model XVP-1 produced by our company, is suitable for the labeling many different bottles in the production line. It has many functions, automatically separating the bottles, labeling and rolling. The label sticking is controlled by the advanced microcomputer photoelectrical system, so it is efficient and high quality. This machine is clean, highly reliable, and easy to operate and regulate. So it is the ideal equipment in the production line of medicinal oral liquid.
Main Technical Specifications
Production Capacity: 40-60 bottles/min;
Bottle Specification : 25m /60ml/125ml/250ml;
Label Paper Specification:The length is smaller than the circumference of the bottle;
Label Interval: 3 -4m ;
Label Roll Specification:
External diameter≤ 350mm ;Internal Diameter of the paperφ76;
Power of the Machine: 1Kw AC 220V 50Hz
The motor of this machine is single-phase electric capacity motor and the rotational speed is constant. The electric motor of the receiving sticks is a five-phase stepper motor, specially designed for this purpose. This machine is still furnished with the special-purpose heat and print nose. The electric motor is suitable for working below 120 degrees Centigrade. This machine is controlled by a photoelectric switch, stepper motor, sticker apparatus, and all the movements are controlled by PLC.
Photoelectric Principle and Trouble Analysis
There are two photoelectric detections, one is for the bottles, and the other one is for the labels.
SS Transmitting Bel
1. Legs and tops: Would have to be SS sheet grade AISI304
2. Belt width: 8-10 inch (previously I mentioned 1 feet)
3. Speed of the belt: You mentioned speed is 2 m /min, but we nee 0 -10 m /min.
4. Motor: 440V, AC, 50 Hz, 1.0 HP, 1400 rpm
5. Working space: 2 feet
6. SS polishing: Mirror polish for legs and dull polish for top
7. Height: 32 inch from floor
8. Driving unit that is motor, gear box have to be covered by SS sheet grade AISI 304.